Internet-Draft SCHC Convergence May 2023
Aguilar, et al. Expires 12 November 2023 [Page]
Workgroup:
schc Working Group
Internet-Draft:
draft-aguilar-schc-convergence-00
Published:
Intended Status:
Standards Track
Expires:
Authors:
S. Aguilar
Universitat Politecnica de Catalunya
C. Gomez
Universitat Politecnica de Catalunya
R. Vidal
Universitat Politecnica de Catalunya

SCHC Convergence Profile

Abstract

The present document defines a profile of Static Context Header Compression and fragmentation (SCHC) [RFC8724] for multi-radio devices or multi-network application. This profile can be used simultaneously over LoRaWAN, Sigfox, NB-IoT and any other technology that may use SCHC Fragmentation/Reassembly functionality.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 12 November 2023.

Table of Contents

1. Introduction

The Static Context Header Compression and fragmentation (SCHC) specification [RFC8724] provides generic adaptation layer functionality, including Compression/Decompression (C/D) and Fragmentation and Reassembly (F/R) functionality. The latter offers three different modes, providing different features.

SCHC over LoRaWAN [RFC9011], SCHC over Sigfox [I-D.lpwan-schc-over-sigfox] and SCHC over NB-IoT [I-D.lpwan-schc-over-nbiot] are technology-specific SCHC profiles, which provide an optimal configuration of SCHC over the corresponding technologies. However, the F/R functionalities of these profiles are not compatible. Therefore, multi-radio devices (e.g., supporting LoRaWAN, Sigfox and NB-IoT interfaces on the same device) require multiple implementations of the SCHC F/R sublayer, one for each technology.

Moreover, multi-network solutions, where the same application is deployed over different LPWAN technologies also require multiple implementations of the SCHC F/R sublayer, one for each deployment.

To reduce implementation complexity, and enable a single convergent F/R sublayer, this document provides the F/R details for a SCHC profile that can be used over all the LPWAN technologies overviewed in [RFC8376], leveraging the benefits of the Compound ACK. This profile can also be used over other technologies that may use SCHC Fragmentation/Reassembly functionality.

2. Terminology

It is assumed that the reader is familiar with the terms and mechanisms defined in [RFC8376] and in [RFC8724].

3. Motivation and Use Cases

3.1. Motivation

IoT applications running over LPWAN devices are tied up to the selected LPWAN technology. The LPWAN constrains influence the design of the IoT application itself. This presents problems when migrating to other LPWANs or networks, as it may imply redesigning the complete IoT application (from device code to backend code). The LPWAN, as a Layer 2 (L2), should be transparent to IoT application (and developers), as it is in the IP domain.

Current advances in the adoption of IPv6 over LPWAN achieved interoperability for application thanks to SCHC [RFC8724], and a single SCHC C/D sublayer. However, each LPWAN technology requires a different implementation of the SCHC F/R sublayer, with different (but actually very similar) F/R modes. Therefore, an IoT application using multiple LPWANs (multiple radios o multiple networks) will require multiple SCHC F/R implementation in device and backend code. This is not the case for the C/D sublayer.

To reduce code complexity and maintenance, and achieve a single convergent SCHC F/R sublayer, this document provides a SCHC Profile which considers the singularities of LoRaWAN, Sigfox and NB-IoT, while providing general F/R modes that work over all of these technologies simultaneously.

3.2. Use Cases

The SCHC over All profile has several use cases:

  • Generic SCHC F/R Profile for implementation of SCHC to test over a new technology. SCHC out-of-the-box F/R modes.
  • Multi-radio devices: Devices implementing more than one LPWAN radio.
  • Multi-network applications: Applications deployed over more than one LPWAN.
  • Network Redundancy:
    • Devices using another LPWAN as backup,
    • devices sending the same SCHC Fragment in different networks to increase the probability of successful fragmented packet reception.
  • Increased device duty-cycle as more networks are available, e.g., if SCHC Packet transmission is not possible over LoRaWAN due to duty-cycle restriction, SCHC Packet transmission may be performed over Sigfox or NB-IoT. This applies also for SCHC Fragments.
  • Devices sending SCHC Fragments over different LPWANs to check available coverage.

4. SCHC over All Profile

4.1. SCHC over All Architecture

[RFC8376] overviews the LoRaWAN, Sigfox, and NB-IoT protocols and their network architectures. More specifically, [RFC9011] maps the network architecture entities between LoRaWAN and LPWAN, as described in [RFC8724]. Similarly, [I-D.lpwan-schc-over-sigfox] and [I-D.lpwan-schc-over-nbiot] for Sigfox and NB-IoT performs the same mapping for Sigfox and NB-IoT, respectively.

Figure 1 shows the architecture when using several SCHC F/R implementations, one for each LPWAN technology. In this case, it is possible to send SCHC Packets over different LPWAN networks.



()   ()   ()       |  |
 ()  () () ()     / \/ \     +---------+   +---------+
() () () () ()   / / \  \====| Network |===|SCHC over|===
 ()  () () ()                | Gateway |   |  NB-IoT | ||
() () () () ()               | (NB-IoT)|   +---------+ ||
 ()  () () ()                +---------+               ||
 () () () ()                                           || +-----------+
()   ()   ()       |  |                                || |Application|
 ()  () () ()     / \/ \     +---------+   +---------+ || +-----------+
() () () () ()   / / \  \====| Network |===|SCHC over|====|  SCHC C/D |
 ()  () () ()                |   Core  |   | Sigfox  | || +-----------+
() () () () ()               | (Sigfox)|   +---------+ ||
 ()  () () ()                +---------+               ||
() () () ()                                            ||
()   ()   ()       |  |      +---------+   +---------+ ||
 ()  () () ()     / \/ \     | Network |   |SCHC over| ||
() () () ()      / / \  \====| Server  |===| LoRaWAN |===
 ()  () () ()                |(LoRaWAN)|   +---------+
() () () ()                  +---------+
End devices  Radio Gateways  Network Server SCHC C/D and F/R
  (devices)        (RGW)         (NGW)

Figure 1: Architecture when using several SCHC F/R implementations

Figure 2 presents the SCHC over All architecture, with a single SCHC C/D and F/R sublayer. This architecture provides a single implementation of the SCHC F/R sublayer.


   ()   ()   ()       |  |
    ()  () () ()     / \/ \     +---------+
   () () () () ()   / / \  \====| Network |==========
    ()  () () ()                | Gateway |        ||
   () () () () ()               | (NB-IoT)|        ||
    ()  () () ()                +---------+        ||
 () () () () ()                               +---------+
   ()   ()   ()       |  |                    |SCHC C/D |
    ()  () () ()     / \/ \     +---------+   |---------|  +-----------+
   () () () () ()   / / \  \====| Network |===|SCHC over|==|Application|
    ()  () () ()                |   Core  |   |   All   |  +-----------+
   () () () () ()               | (Sigfox)|   +---------+
    ()  () () ()                +---------+        ||
   () () () ()                                     ||
   ()   ()   ()       |  |                         ||
    ()  () () ()     / \/ \     +---------+        ||
   () () () () ()   / / \  \====| Network |==========
    ()  () () ()                | Server  |
   () () () () ()               |(LoRaWAN)|
    ()  () () ()                +---------+
   End devices   Radio Gateways  Network Server SCHC C/D and F/R
    (devices)        (RGW)         (NGW)            Server

Figure 2: SCHC over All architecture

In the SCHC over All Profile, as devices have a single SCHC F/R implementation, F/R RuleIDs are the same, independently of the LPWAN technology used, reducing the device memory and complexity requirements when compared to multiple SCHC F/R implementation.

4.2. Single SCHC ID

To simplify the access to RuleIDs and to converge the different device IDs provided by the networks involved, a device needs to have a new identifier called the single SCHC ID.

A device ID translation table maps the network device ID to single SCHC ID. Then, with the single Device ID, it is possible to look up the Rules set and identify the corresponding Rules for such device. This dissociates the network device ID form the Rules, allowing to use the same Rule set for the same device independently of the access network.

The network device IDs used by the LPWAN technologies included in this Profile are:

  • LoRaWAN: DevID
  • Sigfox: DeviceID
  • NB-IoT: IMEI

Figure 3 presents a diagram of the SCHC over All architecture including the Single SCHC device ID translation table.


        +-----------+
        |   Table   |==========
        | Device ID |        ||
        |translation|        ||
        +-----------+        ||
                       +---------+
                       |SCHC C/D |
                       +---------+  +-----------+
  (from All LPWANs) ===|SCHC over|==|Application|
                       |   All   |  +-----------+
                       +---------+

Figure 3: Single SCHC device ID translation table diagram

4.4. Rule Management

The RuleID MUST be 8 bits. In LoRaWAN it MUST be encoded in the LoRaWAN FPort.

4.5. SCHC over All F/R Message Formats

This section depicts the different formats of SCHC Fragment, SCHC ACK (including the SCHC Compound ACK defined in [I-D.ietf-lpwan-schc-compound-ack]), SCHC Aborts and ACK Request used in SCHC over All Uplink ACK-on-Error mode.

4.5.1. Regular SCHC Fragment

Figure 4 shows an example of a regular SCHC fragment for all fragments except the last one. The penultimate tile of a SCHC Packet is of the regular size.


   + ------ + -------------------------- +
   | RuleID |   W    |  FCN   |  Payload |
   + ------ + ------ + ------ + -------- +
   | 8 bits | 3 bits | 5 bits | Variable |

Figure 4: Regular SCHC Fragment

4.5.2. All-1 SCHC Fragment


   + ------ + ---------------------------- +
   | RuleID |   W    | FCN=All-1 |  RCS    |
   + ------ + ------ + --------- + ------- +
   | 8 bits | 3 bits | 5 bits    | 32 bits |

Figure 5: All-1 SCHC Fragment (no tile)

 + ------ + ---------------------------------------------------------- +
 | RuleID |   W    | FCN=All-1 |  RCS    |  Last tile   | Opt. padding |
 + ------ + ------ + --------- + ------- + ------------ + ------------ +
 | 8 bits | 3 bits |  5 bits   | 32 bits | 1 to X bits  | 0 to 7 bits

Figure 6: All-1 SCHC Fragment (with tile)

4.5.3. SCHC ACK Format


   + ------ + --------------------------+
   | RuleID |   W   | C = 1 |  padding  |
   + ------ + ----- + ----- + --------- +
   | 8 bits | 3 bit | 1 bit |  X bits   |

Figure 7: Successful SCHC ACK

   | FPort  | LoRaWAN payload                                      |
   + ------ + --------------------------------- + ---------------- +
   | RuleID |   W   | C = 0 | Compressed bitmap | Optional padding |
   |        |       |       |      (C = 0)      |    (b'0...0)     |
   + ------ + ----- + ----- + ----------------- + ---------------- +
   | 8 bits | 2 bit | 1 bit |    5 to 63 bits   |  0, 6 or 7 bits  |



   |-- SCHC ACK Header --|- W=w1 -|...|---- W=wi -----|
   +------+------+-------+--------+...+------+--------+------+-------+
   |RuleID|W=b'w1| C=b'0 | Bitmap |...|W=b'wi| Bitmap | 000  |b'0-pad|
   +------+------+-------+--------+...+------+--------+------+-------+
   |8 bits|3 bits| 1 bit | 31 bits|...|3 bits| 31 bits|3 bits|


      Losses are found in windows W = w1,...,wi; where w1<w2<...<wi

Figure 8: Failure SCHC ACK

4.5.4. SCHC Receiver-Abort Message



     |-- Receiver-Abort Header -|
     +-----------------------------------+-----------------+---------+
     | RuleID | W=b'111 | C=b'1 | b'1111 |  0xFF (all 1's) | b'0-pad |
     +--------+---------+-------+--------+-----------------+---------+
     | 8 bits |  3 bits | 1 bit | 4 bit  |  8 bit          |  X bits |
                 next L2 Word boundary ->| <-- L2 Word --> |

Figure 9: SCHC Receiver-Abort

4.5.5. SCHC Sender-Abort Messages


      |---- Sender-Abort Header ----|
      +-----------------------------+
      | RuleID |   W    | FCN=ALL-1 |
      +--------+--------+-----------+
      | 8 bits | 3 bits |  5 bits   |

Figure 10: SCHC Sender-Abort

4.5.6. SCHC ACK Request

   |------- ACK Request Header -------|
   +------- +------------------------ +
   | RuleID |    W   | FCN = b'00000  |
   + ------ + ------ + -------------- +
   | 8 bits | 3 bits | 5 bits         |

Figure 11: SCHC ACK Request

5. Acknowledgements

Carles Gomez has been funded in part by the Spanish Government through the TEC2016-79988-P grant, and the PID2019-106808RA-I00 grant (funded by MCIN / AEI / 10.13039/501100011033), and by Secretaria d'Universitats i Recerca del Departament d'Empresa i Coneixement de la Generalitat de Catalunya 2017 through grant SGR 376.

Sergio Aguilar has been funded by the ERDF and the Spanish Government through project TEC2016-79988-P and project PID2019-106808RA-I00, AEI/FEDER, EU (funded by MCIN / AEI / 10.13039/501100011033).

6. Normative References

[I-D.ietf-lpwan-schc-compound-ack]
Zuniga, JC., Gomez, C., Aguilar, S., Toutain, L., Cespedes, S., and D. Wistuba, "SCHC Compound ACK", Work in Progress, Internet-Draft, draft-ietf-lpwan-schc-compound-ack-07, , <http://www.ietf.org/internet-drafts/draft-ietf-lpwan-schc-compound-ack-07.txt>.
[I-D.lpwan-schc-over-nbiot]
Ramos, E. and A. Minaburo, "SCHC over NBIoT", Work in Progress, Internet-Draft, draft-ietf-lpwan-schc-over-nbiot-12, , <http://www.ietf.org/internet-drafts/draft-ietf-lpwan-schc-over-nbiot-12.txt>.
[I-D.lpwan-schc-over-sigfox]
Zuniga, JC., Gomez, C., Aguilar, S., Toutain, L., Cespedes, S., Wistuba, D., and J. Boite, "SCHC over Sigfox LPWAN", Work in Progress, Internet-Draft, draft-ietf-lpwan-schc-over-sigfox-13, , <http://www.ietf.org/internet-drafts/draft-ietf-lpwan-schc-over-sigfox-13.txt>.
[RFC8376]
Farrell, S., Ed., "Low-Power Wide Area Network (LPWAN) Overview", RFC 8376, DOI 10.17487/RFC8376, , <https://www.rfc-editor.org/info/rfc8376>.
[RFC8724]
Minaburo, A., Toutain, L., Gomez, C., Barthel, D., and JC. Zuniga, "SCHC: Generic Framework for Static Context Header Compression and Fragmentation", RFC 8724, DOI 10.17487/RFC8724, , <https://www.rfc-editor.org/info/rfc8724>.
[RFC9011]
Gimenez, O., Ed. and I. Petrov, Ed., "Static Context Header Compression and Fragmentation (SCHC) over LoRaWAN", RFC 9011, DOI 10.17487/RFC9011, , <https://www.rfc-editor.org/info/rfc9011>.

Authors' Addresses

Sergio Aguilar
Universitat Politecnica de Catalunya
C/Esteve Terradas, 7
08860 Castelldefels
Spain
Carles Gomez
Universitat Politecnica de Catalunya
C/Esteve Terradas, 7
08860 Castelldefels
Spain
Rafael Vidal
Universitat Politecnica de Catalunya
C/Esteve Terradas, 7
08860 Castelldefels
Spain