Internet-Draft PQC Kyber in Certificates March 2023
Turner, et al. Expires 29 September 2023 [Page]
Workgroup:
LAMPS
Internet-Draft:
draft-ietf-lamps-kyber-certificates-01
Published:
Intended Status:
Standards Track
Expires:
Authors:
S. Turner
sn3rd
P. Kampanakis
AWS
J. Massimo
AWS
B. Westerbaan
Cloudflare

Internet X.509 Public Key Infrastructure - Algorithm Identifiers for Kyber

Abstract

Kyber is a key-encapsulation mechanism (KEM). This document specifies algorithm identifiers and ASN.1 encoding format for Kyber in public key certificates. The encoding for public and private keys are also provided.

[EDNOTE: This document is not expected to be finalized before the NIST PQC Project has standardized PQ algorithms. This specification will use object identifiers for the new algorithms that are assigned by NIST, and will use placeholders until these are released.]

About This Document

This note is to be removed before publishing as an RFC.

The latest revision of this draft can be found at https://lamps-wg.github.io/kyber-certificates/#go.draft-ietf-lamps-kyber-certificates.html. Status information for this document may be found at https://datatracker.ietf.org/doc/draft-ietf-lamps-kyber-certificates/.

Discussion of this document takes place on the Limited Additional Mechanisms for PKIX and SMIME (lamps) Working Group mailing list (mailto:[email protected]), which is archived at https://mailarchive.ietf.org/arch/browse/spasm/. Subscribe at https://www.ietf.org/mailman/listinfo/spasm/.

Source for this draft and an issue tracker can be found at https://github.com/lamps-wg/kyber-certificates.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 29 September 2023.

Table of Contents

1. Introduction

Kyber is a key-encapsulation mechanism (KEM) standardized by the US NIST PQC Project [PQCProj]. This document specifies the use of the Kyber algorithm at three security levels: Kyber512, Kyber768, and Kyber1024, in X.509 public key certificates; see [RFC5280]. Public and private key encodings are also specified.

1.1. ASN.1 and Kyber Identifiers

An ASN.1 module [X680] is included for reference purposes. Note that as per [RFC5280], certificates use the Distinguished Encoding Rules; see [X690]. Also note that NIST defined the object identifiers for the Kyber algorithms in an ASN.1 modulle; see (TODO insert reference).

1.2. Applicability Statement

Kyber certificates are used in protocols where the public key is used to generate and encapsulate a shared secret used to derive a symmetric key used to encrypt a payload; see [I-D.ietf-lamps-kyber]. To be used in TLS, Kyber certificates could only be used as end-entity identity certificates and would require significant updates to the protocol; see [I-D.celi-wiggers-tls-authkem].

2. Conventions and Definitions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

3. Algorithm Identifiers

Certificates conforming to [RFC5280] can convey a public key for any public key algorithm. The certificate indicates the algorithm through an algorithm identifier. An algorithm identifier consists of an object identifier and optional parameters.

The AlgorithmIdentifier type, which is included herein for convenience, is defined as follows:

  AlgorithmIdentifier{ALGORITHM-TYPE, ALGORITHM-TYPE:AlgorithmSet} ::=
    SEQUENCE {
      algorithm   ALGORITHM-TYPE.&id({AlgorithmSet}),
      parameters  ALGORITHM-TYPE.
                    &Params({AlgorithmSet}{@algorithm}) OPTIONAL
    }

The fields in AlgorithmIdentifier have the following meanings:

Section 4 includes object identifiers for Kyber-512, Kyber-768, and Kyber-1024. For all of these OIDs, the parameters MUST be absent.

4. Kyber Public Key Identifiers

The AlgorithmIdentifier for a Kyber public key MUST use one of the id-alg-kyber object identifiers listed below, based on the security level. The parameters field of the AlgorithmIdentifier for the Kyber public key MUST be absent.

When any of the Kyber AlgorithmIdentifier appears in the SubjectPublicKeyInfo field of an X.509 certificate, the key usage certificate extension MUST only contain keyEncipherment Section 4.2.1.3 of [RFC5280].

  pk-kyber-512 PUBLIC-KEY ::= {
    IDENTIFIER id-alg-kyber-512
    -- KEY no ASN.1 wrapping --
    PARAMS ARE absent
    CERT-KEY-USAGE
      { keyEncipherment }
    --- PRIVATE-KEY no ASN.1 wrapping --
    }

  pk-kyber-768 PUBLIC-KEY ::= {
    IDENTIFIER id-alg-kyber-768
    -- KEY no ASN.1 wrapping --
    PARAMS ARE absent
    CERT-KEY-USAGE
      { keyEncipherment }
    --- PRIVATE-KEY no ASN.1 wrapping --
    }

  pk-kyber-1024 PUBLIC-KEY ::= {
    IDENTIFIER id-alg-kyber-1024
    -- KEY no ASN.1 wrapping --
    PARAMS ARE absent
    CERT-KEY-USAGE
      { keyEncipherment }
    --- PRIVATE-KEY no ASN.1 wrapping --
    }

5. Subject Public Key Fields

In the X.509 certificate, the subjectPublicKeyInfo field has the SubjectPublicKeyInfo type, which has the following ASN.1 syntax:

  SubjectPublicKeyInfo {PUBLIC-KEY: IOSet} ::= SEQUENCE {
      algorithm        AlgorithmIdentifier {PUBLIC-KEY, {IOSet}},
      subjectPublicKey BIT STRING
  }

The fields in SubjectPublicKeyInfo have the following meaning:

The following is an example of a Kyber-512 public key encoded using the textual encoding defined in [RFC7468]:

  -----BEGIN PUBLIC KEY-----
  TODO insert example public key
  -----END PUBLIC KEY-------

6. Private Key Format

"Asymmetric Key Packages" [RFC5958] describes how to encode a private key in a structure that both identifies what algorithm the private key is for and allows for the public key and additional attributes about the key to be included as well. For illustration, the ASN.1 structure OneAsymmetricKey is replicated below. The algorithm-specific details of how a private key is encoded are left for the document describing the algorithm itself.

  OneAsymmetricKey ::= SEQUENCE {
    version                  Version,
    privateKeyAlgorithm      SEQUENCE {
    algorithm                PUBLIC-KEY.&id({PublicKeySet}),
    parameters               PUBLIC-KEY.&Params({PublicKeySet}
                               {@privateKeyAlgorithm.algorithm})
                                  OPTIONAL}
    privateKey               OCTET STRING (CONTAINING
                               PUBLIC-KEY.&PrivateKey({PublicKeySet}
                                 {@privateKeyAlgorithm.algorithm})),
    attributes           [0] Attributes OPTIONAL,
    ...,
    [[2: publicKey       [1] BIT STRING (CONTAINING
                               PUBLIC-KEY.&Params({PublicKeySet}
                                 {@privateKeyAlgorithm.algorithm})
                                 OPTIONAL,
    ...
  }

  PrivateKey ::= OCTET STRING

  PublicKey ::= BIT STRING

For the keys defined in this document, the private key is always an opaque byte sequence. The ASN.1 type PqckemPrivateKey is defined in this document to hold the byte sequence. Thus, when encoding a OneAsymmetricKey object, the private key is wrapped in a PqckemPrivateKey object and wrapped by the OCTET STRING of the "privateKey" field.

  PqckemPrivateKey ::= OCTET STRING

The following is an example of a Kyber-512 private key encoded using the textual encoding defined in [RFC7468]:

  -----BEGIN PRIVATE KEY-----
  TODO iser example private key
  -----END PRIVATE KEY-------

The following example, in addition to encoding the Kyber-512 private key, has an attribute included as well as the public key. As with the prior example, the textual encoding defined in [RFC7468] is used:

  -----BEGIN PRIVATE KEY-----
  TODO insert example private key with attribute
  -----END PRIVATE KEY-------

7. ASN.1 Module

TODO ASN.1 Module

8. Security Considerations

The Security Considerations section of [RFC5280] applies to this specification as well.

[EDNOTE: Discuss side-channels for Kyber TBD1.]

9. IANA Considerations

This document will have some IANA actions.

10. References

10.1. Normative References

[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/rfc/rfc2119>.
[RFC5280]
Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, , <https://www.rfc-editor.org/rfc/rfc5280>.
[RFC5912]
Hoffman, P. and J. Schaad, "New ASN.1 Modules for the Public Key Infrastructure Using X.509 (PKIX)", RFC 5912, DOI 10.17487/RFC5912, , <https://www.rfc-editor.org/rfc/rfc5912>.
[RFC5958]
Turner, S., "Asymmetric Key Packages", RFC 5958, DOI 10.17487/RFC5958, , <https://www.rfc-editor.org/rfc/rfc5958>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/rfc/rfc8174>.
[X680]
ITU-T, "Information technology - Abstract Syntax Notation One (ASN.1): Specification of basic notation", ISO/IEC 8824-1:2021, , <https://www.itu.int/rec/T-REC-X.680>.
[X690]
ITU-T, "Information technology - Abstract Syntax Notation One (ASN.1): ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER)", ISO/IEC 8825-1:2021, , <https://www.itu.int/rec/T-REC-X.690>.

10.2. Informative References

[I-D.celi-wiggers-tls-authkem]
Celi, S., Schwabe, P., Stebila, D., Sullivan, N., and T. Wiggers, "KEM-based Authentication for TLS 1.3", Work in Progress, Internet-Draft, draft-celi-wiggers-tls-authkem-01, , <https://datatracker.ietf.org/doc/html/draft-celi-wiggers-tls-authkem-01>.
[I-D.ietf-lamps-kyber]
Prat, J. and M. Ounsworth, "Use of KYBER in the Cryptographic Message Syntax (CMS)", Work in Progress, Internet-Draft, draft-ietf-lamps-kyber-00, , <https://datatracker.ietf.org/doc/html/draft-ietf-lamps-kyber-00>.
[PQCProj]
National Institute of Standards and Technology, "Post-Quantum Cryptography Project", , <https://csrc.nist.gov/projects/post-quantum-cryptography>.
[RFC7468]
Josefsson, S. and S. Leonard, "Textual Encodings of PKIX, PKCS, and CMS Structures", RFC 7468, DOI 10.17487/RFC7468, , <https://www.rfc-editor.org/rfc/rfc7468>.

Acknowledgments

TODO acknowledge.

Authors' Addresses

Sean Turner
sn3rd
Panos Kampanakis
AWS
Jake Massimo
AWS
Bas Westerbaan
Cloudflare