Internet-Draft A YANG Data Model for a Keystore April 2023
Watsen Expires 19 October 2023 [Page]
Workgroup:
NETCONF Working Group
Internet-Draft:
draft-ietf-netconf-keystore-28
Published:
Intended Status:
Standards Track
Expires:
Author:
K. Watsen
Watsen Networks

A YANG Data Model for a Keystore

Abstract

This document defines a YANG module called "ietf-keystore" that enables centralized configuration of both symmetric and asymmetric keys. The secret value for both key types may be encrypted or hidden. Asymmetric keys may be associated with certificates. Notifications are sent when certificates are about to expire.

Editorial Note (To be removed by RFC Editor)

This draft contains placeholder values that need to be replaced with finalized values at the time of publication. This note summarizes all of the substitutions that are needed. No other RFC Editor instructions are specified elsewhere in this document.

Artwork in this document contains shorthand references to drafts in progress. Please apply the following replacements:

Artwork in this document contains placeholder values for the date of publication of this draft. Please apply the following replacement:

The "Relation to other RFCs" section Section 1.1 contains the text "one or more YANG modules" and, later, "modules". This text is sourced from a file in a context where it is unknown how many modules a draft defines. The text is not wrong as is, but it may be improved by stating more directly how many modules are defined.

The "Relation to other RFCs" section Section 1.1 contains a self-reference to this draft, along with a corresponding Informative Reference in the Appendix.

The following Appendix section is to be removed prior to publication:

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 19 October 2023.

Table of Contents

1. Introduction

This document defines a YANG 1.1 [RFC7950] module called "ietf-keystore" that enables centralized configuration of both symmetric and asymmetric keys. The secret value for both key types may be encrypted or hidden (see [I-D.ietf-netconf-crypto-types]). Asymmetric keys may be associated with certificates. Notifications are sent when certificates are about to expire.

The "ietf-keystore" module defines many "grouping" statements intended for use by other modules that may import it. For instance, there are groupings that define enabling a key to be either configured inline (within the defining data model) or as a reference to a key in the keystore.

Special consideration has been given for servers that have cryptographic hardware, such as a Trusted Platform Module (TPM). These servers are unique in that the cryptographic hardware hides the secret key values. Additionally, such hardware is commonly initialized when manufactured to protect a "built-in" asymmetric key for which its public half is conveyed in an identity certificate (e.g., an IDevID [Std-802.1AR-2018] certificate). Please see Section 3 to see how built-in keys are supported.

This document intends to support existing practices; it does not intend to define new behavior for servers to implement. To simplify implementation, advanced key formats may be selectively implemented.

Implementations may utilize zero or more operating-system level keystore utilities (e.g., "Keychain Access" on MacOS) and/or cryptographic hardware (e.g., TPMs).

1.1. Relation to other RFCs

This document presents one or more YANG modules [RFC7950] that are part of a collection of RFCs that work together to, ultimately, enable the configuration of both the clients and servers of both the NETCONF [RFC6241] and RESTCONF [RFC8040] protocols.

The normative dependency relationship between the various RFCs in this collection is presented in the below diagram. The labels in the diagram represent the primary purpose provided by each RFC. URLs for each RFC are provided below the diagram.

                               crypto-types
                                 ^      ^
                                /        \
                               /          \
                      truststore         keystore
                       ^     ^             ^  ^
                       |     +---------+   |  |
                       |               |   |  |
                       |      +------------+  |
tcp-client-server      |     /         |      |
   ^    ^        ssh-client-server     |      |
   |    |           ^            tls-client-server
   |    |           |              ^     ^        http-client-server
   |    |           |              |     |                 ^
   |    |           |        +-----+     +---------+       |
   |    |           |        |                     |       |
   |    +-----------|--------|--------------+      |       |
   |                |        |              |      |       |
   +-----------+    |        |              |      |       |
               |    |        |              |      |       |
               |    |        |              |      |       |
            netconf-client-server       restconf-client-server

Table 1: Label to RFC Mapping
Label in Diagram Originating RFC
crypto-types [I-D.ietf-netconf-crypto-types]
truststore [I-D.ietf-netconf-trust-anchors]
keystore [I-D.ietf-netconf-keystore]
tcp-client-server [I-D.ietf-netconf-tcp-client-server]
ssh-client-server [I-D.ietf-netconf-ssh-client-server]
tls-client-server [I-D.ietf-netconf-tls-client-server]
http-client-server [I-D.ietf-netconf-http-client-server]
netconf-client-server [I-D.ietf-netconf-netconf-client-server]
restconf-client-server [I-D.ietf-netconf-restconf-client-server]

1.2. Specification Language

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

1.3. Terminology

The terms "client" and "server" are defined in [RFC6241] and are not redefined here.

The term "keystore" is defined in this document as a mechanism that intends safeguard secrets placed into it for protection.

The nomenclature "<running>" and "<operational>" are defined in [RFC8342].

The sentence fragments "augmented" and "augmented in" are used herein as the past tense verbified form of the "augment" statement defined in Section 7.17 of [RFC7950].

The term "key" may be used to mean one of three things in this document: 1) the YANG-defined "asymmetric-key" or "symmetric-key" node defined in this document, 2) the raw key data possessed by the aforementioned key nodes, and 3) the "key" of a YANG "list" statement. This document attempts to always qualify types '2' and '3' using, "raw key value" and "YANG list key" where needed. In all other cases, an unqualified "key" refers to a YANG-defined "asymmetric-key" or "symmetric-key" node.

1.4. Adherence to the NMDA

This document is compliant with Network Management Datastore Architecture (NMDA) [RFC8342]. For instance, keys and associated certificates installed during manufacturing (e.g., for an IDevID certificate) are expected to appear in <operational> (see Section 3).

1.5. Conventions

Various examples used in this document use a placeholder value for binary data that has been base64 encoded (e.g., "BASE64VALUE="). This placeholder value is used as real base64 encoded structures are often many lines long and hence distracting to the example being presented.

2. The "ietf-keystore" Module

This section defines a YANG 1.1 [RFC7950] module called "ietf-keystore". A high-level overview of the module is provided in Section 2.1. Examples illustrating the module's use are provided in Section 2.2. The YANG module itself is defined in Section 2.3.

2.1. Data Model Overview

This section provides an overview of the "ietf-keystore" module in terms of its features, typedefs, groupings, and protocol-accessible nodes.

2.1.1. Features

The following diagram lists all the "feature" statements defined in the "ietf-keystore" module:

Features:
  +-- central-keystore-supported
  +-- inline-definitions-supported
  +-- asymmetric-keys
  +-- symmetric-keys

The diagram above uses syntax that is similar to but not defined in [RFC8340].

2.1.2. Typedefs

The following diagram lists the "typedef" statements defined in the "ietf-keystore" module:

Typedefs:
  leafref
    +-- symmetric-key-ref
    +-- asymmetric-key-ref

The diagram above uses syntax that is similar to but not defined in [RFC8340].

Comments:

  • All the typedefs defined in the "ietf-keystore" module extend the base "leafref" type defined in [RFC7950].
  • The leafrefs refer to symmetric and asymmetric keys in the central keystore, when this module is implemented.
  • These typedefs are provided as an aid to consuming modules that import the "ietf-keystore" module.

2.1.3. Groupings

The "ietf-keystore" module defines the following "grouping" statements:

  • encrypted-by-choice-grouping
  • asymmetric-key-certificate-ref-grouping
  • inline-or-keystore-symmetric-key-grouping
  • inline-or-keystore-asymmetric-key-grouping
  • inline-or-keystore-asymmetric-key-with-certs-grouping
  • inline-or-keystore-end-entity-cert-with-key-grouping
  • keystore-grouping

Each of these groupings are presented in the following subsections.

2.1.3.1. The "encrypted-by-choice-grouping" Grouping

The following tree diagram [RFC8340] illustrates the "encrypted-by-choice-grouping" grouping:

The grouping's name is intended to be parsed "(encrypted-by)-(choice)-(grouping)", not as "(encrypted)-(by-choice)-(grouping)".

  grouping encrypted-by-choice-grouping:
    +-- (encrypted-by-choice)
       +--:(symmetric-key-ref)
       |        {central-keystore-supported,symmetric-keys}?
       |  +-- symmetric-key-ref?    ks:symmetric-key-ref
       +--:(asymmetric-key-ref)
                {central-keystore-supported,asymmetric-keys}?
          +-- asymmetric-key-ref?   ks:asymmetric-key-ref

Comments:

  • This grouping defines a "choice" statement with options to reference either a symmetric or an asymmetric key configured in the keystore.
  • This grouping is usable only when the keystore module is implemented. Servers defining custom keystore locations MUST augment in alternate "encrypted-by" references to the alternate locations.
2.1.3.2. The "asymmetric-key-certificate-ref-grouping" Grouping

The following tree diagram [RFC8340] illustrates the "asymmetric-key-certificate-ref-grouping" grouping:

  grouping asymmetric-key-certificate-ref-grouping:
    +-- asymmetric-key?   ks:asymmetric-key-ref
    |       {central-keystore-supported,asymmetric-keys}?
    +-- certificate?      leafref

Comments:

  • This grouping defines a reference to a certificate in two parts: the first being the name of the asymmetric key the certificate is associated with, and the second being the name of the certificate itself.
  • This grouping is usable only when the keystore module is implemented. Servers defining custom keystore locations MAY define an alternate grouping for references to the alternate locations.
2.1.3.3. The "inline-or-keystore-symmetric-key-grouping" Grouping

The following tree diagram [RFC8340] illustrates the "inline-or-keystore-symmetric-key-grouping" grouping:

  grouping inline-or-keystore-symmetric-key-grouping:
    +-- (inline-or-keystore)
       +--:(inline) {inline-definitions-supported}?
       |  +-- inline-definition
       |     +---u ct:symmetric-key-grouping
       +--:(keystore) {central-keystore-supported,symmetric-keys}?
          +-- keystore-reference?   ks:symmetric-key-ref

Comments:

  • The "inline-or-keystore-symmetric-key-grouping" grouping is provided solely as convenience to consuming modules that wish to offer an option for whether a symmetric key is defined inline or as a reference to a symmetric key in the keystore.
  • A "choice" statement is used to expose the various options. Each option is enabled by a "feature" statement. Additional "case" statements MAY be augmented in if, e.g., there is a need to reference a symmetric key in an alternate location.
  • For the "inline-definition" option, the definition uses the "symmetric-key-grouping" grouping discussed in Section 2.1.4.3 of [I-D.ietf-netconf-crypto-types].
  • For the "keystore" option, the "keystore-reference" is an instance of the "symmetric-key-ref" discussed in Section 2.1.2.
2.1.3.4. The "inline-or-keystore-asymmetric-key-grouping" Grouping

The following tree diagram [RFC8340] illustrates the "inline-or-keystore-asymmetric-key-grouping" grouping:

  grouping inline-or-keystore-asymmetric-key-grouping:
    +-- (inline-or-keystore)
       +--:(inline) {inline-definitions-supported}?
       |  +-- inline-definition
       |     +---u ct:asymmetric-key-pair-grouping
       +--:(keystore) {central-keystore-supported,asymmetric-keys}?
          +-- keystore-reference?   ks:asymmetric-key-ref

Comments:

  • The "inline-or-keystore-asymmetric-key-grouping" grouping is provided solely as convenience to consuming modules that wish to offer an option for whether an asymmetric key is defined inline or as a reference to an asymmetric key in the keystore.
  • A "choice" statement is used to expose the various options. Each option is enabled by a "feature" statement. Additional "case" statements MAY be augmented in if, e.g., there is a need to reference an asymmetric key in an alternate location.
  • For the "inline-definition" option, the definition uses the "asymmetric-key-pair-grouping" grouping discussed in Section 2.1.4.5 of [I-D.ietf-netconf-crypto-types].
  • For the "keystore" option, the "keystore-reference" is an instance of the "asymmetric-key-ref" typedef discussed in Section 2.1.2.
2.1.3.5. The "inline-or-keystore-asymmetric-key-with-certs-grouping" Grouping

The following tree diagram [RFC8340] illustrates the "inline-or-keystore-asymmetric-key-with-certs-grouping" grouping:

  grouping inline-or-keystore-asymmetric-key-with-certs-grouping:
    +-- (inline-or-keystore)
       +--:(inline) {inline-definitions-supported}?
       |  +-- inline-definition
       |     +---u ct:asymmetric-key-pair-with-certs-grouping
       +--:(keystore) {central-keystore-supported,asymmetric-keys}?
          +-- keystore-reference?   ks:asymmetric-key-ref

Comments:

  • The "inline-or-keystore-asymmetric-key-with-certs-grouping" grouping is provided solely as convenience to consuming modules that wish to offer an option for whether an asymmetric key is defined inline or as a reference to an asymmetric key in the keystore.
  • A "choice" statement is used to expose the various options. Each option is enabled by a "feature" statement. Additional "case" statements MAY be augmented in if, e.g., there is a need to reference an asymmetric key in an alternate location.
  • For the "inline-definition" option, the definition uses the "asymmetric-key-pair-with-certs-grouping" grouping discussed in Section 2.1.4.11 of [I-D.ietf-netconf-crypto-types].
  • For the "keystore" option, the "keystore-reference" is an instance of the "asymmetric-key-ref" typedef discussed in Section 2.1.2.
2.1.3.6. The "inline-or-keystore-end-entity-cert-with-key-grouping" Grouping

The following tree diagram [RFC8340] illustrates the "inline-or-keystore-end-entity-cert-with-key-grouping" grouping:

  grouping inline-or-keystore-end-entity-cert-with-key-grouping:
    +-- (inline-or-keystore)
       +--:(inline) {inline-definitions-supported}?
       |  +-- inline-definition
       |     +---u ct:asymmetric-key-pair-with-cert-grouping
       +--:(keystore) {central-keystore-supported,asymmetric-keys}?
          +-- keystore-reference
             +---u asymmetric-key-certificate-ref-grouping

Comments:

  • The "inline-or-keystore-end-entity-cert-with-key-grouping" grouping is provided solely as convenience to consuming modules that wish to offer an option for whether a symmetric key is defined inline or as a reference to a symmetric key in the keystore.
  • A "choice" statement is used to expose the various options. Each option is enabled by a "feature" statement. Additional "case" statements MAY be augmented in if, e.g., there is a need to reference a symmetric key in an alternate location.
  • For the "inline-definition" option, the definition uses the "asymmetric-key-pair-with-certs-grouping" grouping discussed in Section 2.1.4.11 of [I-D.ietf-netconf-crypto-types].
  • For the "keystore" option, the "keystore-reference" uses the "asymmetric-key-certificate-ref-grouping" grouping discussed in Section 2.1.3.2.
2.1.3.7. The "keystore-grouping" Grouping

The following tree diagram [RFC8340] illustrates the "keystore-grouping" grouping:

  grouping keystore-grouping:
    +-- asymmetric-keys {asymmetric-keys}?
    |  +-- asymmetric-key* [name]
    |     +-- name?                                         string
    |     +---u ct:asymmetric-key-pair-with-certs-grouping
    +-- symmetric-keys {symmetric-keys}?
       +-- symmetric-key* [name]
          +-- name?                        string
          +---u ct:symmetric-key-grouping

Comments:

  • The "keystore-grouping" grouping defines a keystore instance as being composed of symmetric and asymmetric keys. The structure for the symmetric and asymmetric keys is essentially the same, being a "list" inside a "container".
  • For asymmetric keys, each "asymmetric-key" uses the "asymmetric-key-pair-with-certs-grouping" grouping discussed in Section 2.1.4.11 of [I-D.ietf-netconf-crypto-types].
  • For symmetric keys, each "symmetric-key" uses the "symmetric-key-grouping" grouping discussed in Section 2.1.4.3 of [I-D.ietf-netconf-crypto-types].

2.1.4. Protocol-accessible Nodes

The following tree diagram [RFC8340] lists all the protocol-accessible nodes defined in the "ietf-keystore" module, without expanding the "grouping" statements:

module: ietf-keystore
  +--rw keystore {central-keystore-supported}?
     +---u keystore-grouping

The following tree diagram [RFC8340] lists all the protocol-accessible nodes defined in the "ietf-keystore" module, with all "grouping" statements expanded, enabling the keystore's full structure to be seen:

=============== NOTE: '\' line wrapping per RFC 8792 ================

module: ietf-keystore
  +--rw keystore {central-keystore-supported}?
     +--rw asymmetric-keys {asymmetric-keys}?
     |  +--rw asymmetric-key* [name]
     |     +--rw name                           string
     |     +--rw public-key-format              identityref
     |     +--rw public-key                     binary
     |     +--rw private-key-format?            identityref
     |     +--rw (private-key-type)
     |     |  +--:(cleartext-private-key) {cleartext-private-keys}?
     |     |  |  +--rw cleartext-private-key?   binary
     |     |  +--:(hidden-private-key) {hidden-private-keys}?
     |     |  |  +--rw hidden-private-key?      empty
     |     |  +--:(encrypted-private-key) {encrypted-private-keys}?
     |     |     +--rw encrypted-private-key
     |     |        +--rw encrypted-by
     |     |        |  +--rw (encrypted-by-choice)
     |     |        |     +--:(symmetric-key-ref)
     |     |        |     |        {central-keystore-supported,symme\
tric-keys}?
     |     |        |     |  +--rw symmetric-key-ref?
     |     |        |     |          ks:symmetric-key-ref
     |     |        |     +--:(asymmetric-key-ref)
     |     |        |              {central-keystore-supported,asymm\
etric-keys}?
     |     |        |        +--rw asymmetric-key-ref?
     |     |        |                ks:asymmetric-key-ref
     |     |        +--rw encrypted-value-format    identityref
     |     |        +--rw encrypted-value           binary
     |     +--rw certificates
     |     |  +--rw certificate* [name]
     |     |     +--rw name                      string
     |     |     +--rw cert-data                 end-entity-cert-cms
     |     |     +---n certificate-expiration
     |     |             {certificate-expiration-notification}?
     |     |        +-- expiration-date    yang:date-and-time
     |     +---x generate-csr {csr-generation}?
     |        +---w input
     |        |  +---w csr-format    identityref
     |        |  +---w csr-info      csr-info
     |        +--ro output
     |           +--ro (csr-type)
     |              +--:(p10-csr)
     |                 +--ro p10-csr?   p10-csr
     +--rw symmetric-keys {symmetric-keys}?
        +--rw symmetric-key* [name]
           +--rw name                   string
           +--rw key-format?            identityref
           +--rw (key-type)
              +--:(cleartext-key)
              |  +--rw cleartext-key?   binary
              |          {cleartext-symmetric-keys}?
              +--:(hidden-key) {hidden-symmetric-keys}?
              |  +--rw hidden-key?      empty
              +--:(encrypted-key) {encrypted-symmetric-keys}?
                 +--rw encrypted-key
                    +--rw encrypted-by
                    |  +--rw (encrypted-by-choice)
                    |     +--:(symmetric-key-ref)
                    |     |        {central-keystore-supported,symme\
tric-keys}?
                    |     |  +--rw symmetric-key-ref?
                    |     |          ks:symmetric-key-ref
                    |     +--:(asymmetric-key-ref)
                    |              {central-keystore-supported,asymm\
etric-keys}?
                    |        +--rw asymmetric-key-ref?
                    |                ks:asymmetric-key-ref
                    +--rw encrypted-value-format    identityref
                    +--rw encrypted-value           binary

Comments:

  • Protocol-accessible nodes are those nodes that are accessible when the module is "implemented", as described in Section 5.6.5 of [RFC7950].
  • The protocol-accessible nodes for the "ietf-keystore" module are instances of the "keystore-grouping" grouping discussed in Section 2.1.3.7.
  • The top-level node "keystore" is additionally constrained by the feature "central-keystore-supported".
  • The "keystore-grouping" grouping is discussed in Section 2.1.3.7.
  • The reason for why "keystore-grouping" exists separate from the protocol-accessible nodes definition is so as to enable instances of the keystore to be instantiated in other locations, as may be needed or desired by some modules.

2.2. Example Usage

The examples in this section are encoded using XML, such as might be the case when using the NETCONF protocol. Other encodings MAY be used, such as JSON when using the RESTCONF protocol.

2.2.1. A Keystore Instance

The following example illustrates keys in <running>. Please see Section 3 for an example illustrating built-in values in <operational>.

=============== NOTE: '\' line wrapping per RFC 8792 ================

<keystore
   xmlns="urn:ietf:params:xml:ns:yang:ietf-keystore"
   xmlns:ct="urn:ietf:params:xml:ns:yang:ietf-crypto-types">

   <symmetric-keys>
      <symmetric-key>
         <name>cleartext-symmetric-key</name>
         <key-format>ct:octet-string-key-format</key-format>
         <cleartext-key>BASE64VALUE=</cleartext-key>
      </symmetric-key>
      <symmetric-key>
         <name>hidden-symmetric-key</name>
         <hidden-key/>
      </symmetric-key>
      <symmetric-key>
         <name>encrypted-symmetric-key</name>
         <key-format>ct:one-symmetric-key-format</key-format>
         <encrypted-key>
           <encrypted-by>
             <asymmetric-key-ref>hidden-asymmetric-key</asymmetric-k\
ey-ref>
           </encrypted-by>
           <encrypted-value-format>ct:cms-enveloped-data-format</enc\
rypted-value-format>
           <encrypted-value>BASE64VALUE=</encrypted-value>
         </encrypted-key>
      </symmetric-key>
   </symmetric-keys>

   <asymmetric-keys>
      <asymmetric-key>
         <name>ssh-rsa-key</name>
         <public-key-format>ct:ssh-public-key-format</public-key-for\
mat>
         <public-key>BASE64VALUE=</public-key>
         <private-key-format>ct:rsa-private-key-format</private-key-\
format>
         <cleartext-private-key>BASE64VALUE=</cleartext-private-key>
      </asymmetric-key>
      <asymmetric-key>
         <name>ssh-rsa-key-with-cert</name>
         <public-key-format>ct:subject-public-key-info-format</publi\
c-key-format>
         <public-key>BASE64VALUE=</public-key>
         <private-key-format>ct:rsa-private-key-format</private-key-\
format>
         <cleartext-private-key>BASE64VALUE=</cleartext-private-key>
         <certificates>
            <certificate>
               <name>ex-rsa-cert2</name>
               <cert-data>BASE64VALUE=</cert-data>
            </certificate>
         </certificates>
      </asymmetric-key>
      <asymmetric-key>
         <name>raw-private-key</name>
         <public-key-format>ct:subject-public-key-info-format</publi\
c-key-format>
         <public-key>BASE64VALUE=</public-key>
         <private-key-format>ct:rsa-private-key-format</private-key-\
format>
         <cleartext-private-key>BASE64VALUE=</cleartext-private-key>
      </asymmetric-key>
      <asymmetric-key>
         <name>rsa-asymmetric-key</name>
         <public-key-format>ct:subject-public-key-info-format</publi\
c-key-format>
         <public-key>BASE64VALUE=</public-key>
         <private-key-format>ct:rsa-private-key-format</private-key-\
format>
         <cleartext-private-key>BASE64VALUE=</cleartext-private-key>
         <certificates>
            <certificate>
               <name>ex-rsa-cert</name>
               <cert-data>BASE64VALUE=</cert-data>
            </certificate>
         </certificates>
      </asymmetric-key>
      <asymmetric-key>
         <name>ec-asymmetric-key</name>
         <public-key-format>ct:subject-public-key-info-format</publi\
c-key-format>
         <public-key>BASE64VALUE=</public-key>
         <private-key-format>ct:ec-private-key-format</private-key-f\
ormat>
         <cleartext-private-key>BASE64VALUE=</cleartext-private-key>
         <certificates>
            <certificate>
               <name>ex-ec-cert</name>
               <cert-data>BASE64VALUE=</cert-data>
            </certificate>
         </certificates>
      </asymmetric-key>
      <asymmetric-key>
         <name>hidden-asymmetric-key</name>
         <public-key-format>ct:subject-public-key-info-format</publi\
c-key-format>
         <public-key>BASE64VALUE=</public-key>
         <hidden-private-key/>
         <certificates>
            <certificate>
               <name>builtin-idevid-cert</name>
               <cert-data>BASE64VALUE=</cert-data>
            </certificate>
            <certificate>
               <name>my-ldevid-cert</name>
               <cert-data>BASE64VALUE=</cert-data>
            </certificate>
         </certificates>
      </asymmetric-key>
      <asymmetric-key>
         <name>encrypted-asymmetric-key</name>
         <public-key-format>ct:subject-public-key-info-format</publi\
c-key-format>
         <public-key>BASE64VALUE=</public-key>
         <private-key-format>ct:one-asymmetric-key-format</private-k\
ey-format>
         <encrypted-private-key>
           <encrypted-by>
             <symmetric-key-ref>encrypted-symmetric-key</symmetric-k\
ey-ref>
           </encrypted-by>
           <encrypted-value-format>ct:cms-encrypted-data-format</enc\
rypted-value-format>
           <encrypted-value>BASE64VALUE=</encrypted-value>
         </encrypted-private-key>
      </asymmetric-key>
   </asymmetric-keys>
</keystore>

2.2.2. A Certificate Expiration Notification

The following example illustrates a "certificate-expiration" notification for a certificate associated with an asymmetric key configured in the keystore.

=============== NOTE: '\' line wrapping per RFC 8792 ================

<notification
  xmlns="urn:ietf:params:xml:ns:netconf:notification:1.0">
  <eventTime>2018-05-25T00:01:00Z</eventTime>
  <keystore xmlns="urn:ietf:params:xml:ns:yang:ietf-keystore">
    <asymmetric-keys>
      <asymmetric-key>
        <name>hidden-asymmetric-key</name>
        <certificates>
          <certificate>
            <name>my-ldevid-cert</name>
            <certificate-expiration>
              <expiration-date>2018-08-05T14:18:53-05:00</expiration\
-date>
            </certificate-expiration>
          </certificate>
        </certificates>
      </asymmetric-key>
    </asymmetric-keys>
  </keystore>
</notification>

2.2.3. The "Local or Keystore" Groupings

This section illustrates the various "inline-or-keystore" groupings defined in the "ietf-keystore" module, specifically the "inline-or-keystore-symmetric-key-grouping" (Section 2.1.3.3), "inline-or-keystore-asymmetric-key-grouping" (Section 2.1.3.4), "inline-or-keystore-asymmetric-key-with-certs-grouping" (Section 2.1.3.5), and "inline-or-keystore-end-entity-cert-with-key-grouping" (Section 2.1.3.6) groupings.

These examples assume the existence of an example module called "ex-keystore-usage" having the namespace "http://example.com/ns/example-keystore-usage".

The ex-keystore-usage module is first presented using tree diagrams [RFC8340], followed by an instance example illustrating all the "inline-or-keystore" groupings in use, followed by the YANG module itself.

2.2.3.1. Tree Diagrams for the "ex-keystore-usage" Module

The following tree diagram illustrates "ex-keystore-usage" without expanding the "grouping" statements:

=============== NOTE: '\' line wrapping per RFC 8792 ================

module: ex-keystore-usage
  +--rw keystore-usage
     +--rw symmetric-key* [name]
     |  +--rw name                                            string
     |  +---u ks:inline-or-keystore-symmetric-key-grouping
     +--rw asymmetric-key* [name]
     |  +--rw name                                             string
     |  +---u ks:inline-or-keystore-asymmetric-key-grouping
     +--rw asymmetric-key-with-certs* [name]
     |  +--rw name
     |  |       string
     |  +---u ks:inline-or-keystore-asymmetric-key-with-certs-groupi\
ng
     +--rw end-entity-cert-with-key* [name]
        +--rw name
        |       string
        +---u ks:inline-or-keystore-end-entity-cert-with-key-grouping

The following tree diagram illustrates the "ex-keystore-usage" module, with all "grouping" statements expanded, enabling the usage's full structure to be seen:

=============== NOTE: '\' line wrapping per RFC 8792 ================

module: ex-keystore-usage
  +--rw keystore-usage
     +--rw symmetric-key* [name]
     |  +--rw name                        string
     |  +--rw (inline-or-keystore)
     |     +--:(inline) {inline-definitions-supported}?
     |     |  +--rw inline-definition
     |     |     +--rw key-format?            identityref
     |     |     +--rw (key-type)
     |     |        +--:(cleartext-key)
     |     |        |  +--rw cleartext-key?   binary
     |     |        |          {cleartext-symmetric-keys}?
     |     |        +--:(hidden-key) {hidden-symmetric-keys}?
     |     |        |  +--rw hidden-key?      empty
     |     |        +--:(encrypted-key) {encrypted-symmetric-keys}?
     |     |           +--rw encrypted-key
     |     |              +--rw encrypted-by
     |     |              +--rw encrypted-value-format    identityref
     |     |              +--rw encrypted-value           binary
     |     +--:(keystore)
     |              {central-keystore-supported,symmetric-keys}?
     |        +--rw keystore-reference?   ks:symmetric-key-ref
     +--rw asymmetric-key* [name]
     |  +--rw name                        string
     |  +--rw (inline-or-keystore)
     |     +--:(inline) {inline-definitions-supported}?
     |     |  +--rw inline-definition
     |     |     +--rw public-key-format              identityref
     |     |     +--rw public-key                     binary
     |     |     +--rw private-key-format?            identityref
     |     |     +--rw (private-key-type)
     |     |        +--:(cleartext-private-key)
     |     |        |        {cleartext-private-keys}?
     |     |        |  +--rw cleartext-private-key?   binary
     |     |        +--:(hidden-private-key) {hidden-private-keys}?
     |     |        |  +--rw hidden-private-key?      empty
     |     |        +--:(encrypted-private-key)
     |     |                 {encrypted-private-keys}?
     |     |           +--rw encrypted-private-key
     |     |              +--rw encrypted-by
     |     |              +--rw encrypted-value-format    identityref
     |     |              +--rw encrypted-value           binary
     |     +--:(keystore)
     |              {central-keystore-supported,asymmetric-keys}?
     |        +--rw keystore-reference?   ks:asymmetric-key-ref
     +--rw asymmetric-key-with-certs* [name]
     |  +--rw name                        string
     |  +--rw (inline-or-keystore)
     |     +--:(inline) {inline-definitions-supported}?
     |     |  +--rw inline-definition
     |     |     +--rw public-key-format              identityref
     |     |     +--rw public-key                     binary
     |     |     +--rw private-key-format?            identityref
     |     |     +--rw (private-key-type)
     |     |     |  +--:(cleartext-private-key)
     |     |     |  |        {cleartext-private-keys}?
     |     |     |  |  +--rw cleartext-private-key?   binary
     |     |     |  +--:(hidden-private-key) {hidden-private-keys}?
     |     |     |  |  +--rw hidden-private-key?      empty
     |     |     |  +--:(encrypted-private-key)
     |     |     |           {encrypted-private-keys}?
     |     |     |     +--rw encrypted-private-key
     |     |     |        +--rw encrypted-by
     |     |     |        +--rw encrypted-value-format    identityref
     |     |     |        +--rw encrypted-value           binary
     |     |     +--rw certificates
     |     |     |  +--rw certificate* [name]
     |     |     |     +--rw name                      string
     |     |     |     +--rw cert-data
     |     |     |     |       end-entity-cert-cms
     |     |     |     +---n certificate-expiration
     |     |     |             {certificate-expiration-notification}?
     |     |     |        +-- expiration-date    yang:date-and-time
     |     |     +---x generate-csr {csr-generation}?
     |     |        +---w input
     |     |        |  +---w csr-format    identityref
     |     |        |  +---w csr-info      csr-info
     |     |        +--ro output
     |     |           +--ro (csr-type)
     |     |              +--:(p10-csr)
     |     |                 +--ro p10-csr?   p10-csr
     |     +--:(keystore)
     |              {central-keystore-supported,asymmetric-keys}?
     |        +--rw keystore-reference?   ks:asymmetric-key-ref
     +--rw end-entity-cert-with-key* [name]
        +--rw name                        string
        +--rw (inline-or-keystore)
           +--:(inline) {inline-definitions-supported}?
           |  +--rw inline-definition
           |     +--rw public-key-format              identityref
           |     +--rw public-key                     binary
           |     +--rw private-key-format?            identityref
           |     +--rw (private-key-type)
           |     |  +--:(cleartext-private-key)
           |     |  |        {cleartext-private-keys}?
           |     |  |  +--rw cleartext-private-key?   binary
           |     |  +--:(hidden-private-key) {hidden-private-keys}?
           |     |  |  +--rw hidden-private-key?      empty
           |     |  +--:(encrypted-private-key)
           |     |           {encrypted-private-keys}?
           |     |     +--rw encrypted-private-key
           |     |        +--rw encrypted-by
           |     |        +--rw encrypted-value-format    identityref
           |     |        +--rw encrypted-value           binary
           |     +--rw cert-data?
           |     |       end-entity-cert-cms
           |     +---n certificate-expiration
           |     |       {certificate-expiration-notification}?
           |     |  +-- expiration-date    yang:date-and-time
           |     +---x generate-csr {csr-generation}?
           |        +---w input
           |        |  +---w csr-format    identityref
           |        |  +---w csr-info      csr-info
           |        +--ro output
           |           +--ro (csr-type)
           |              +--:(p10-csr)
           |                 +--ro p10-csr?   p10-csr
           +--:(keystore)
                    {central-keystore-supported,asymmetric-keys}?
              +--rw keystore-reference
                 +--rw asymmetric-key?   ks:asymmetric-key-ref
                 |       {central-keystore-supported,asymmetric-keys\
}?
                 +--rw certificate?      leafref
2.2.3.2. Example Usage for the "ex-keystore-usage" Module

The following example provides two equivalent instances of each grouping, the first being a reference to a keystore and the second being inlined. The instance having a reference to a keystore is consistent with the keystore defined in Section 2.2.1. The two instances are equivalent, as the inlined instance example contains the same values defined by the keystore instance referenced by its sibling example.

=============== NOTE: '\' line wrapping per RFC 8792 ================

<keystore-usage
  xmlns="http://example.com/ns/example-keystore-usage"
  xmlns:ct="urn:ietf:params:xml:ns:yang:ietf-crypto-types">

  <!-- The following two equivalent examples illustrate the -->
  <!-- "inline-or-keystore-symmetric-key-grouping" grouping: -->

  <symmetric-key>
    <name>example 1a</name>
    <keystore-reference>cleartext-symmetric-key</keystore-reference>
  </symmetric-key>

  <symmetric-key>
    <name>example 1b</name>
    <inline-definition>
      <key-format>ct:octet-string-key-format</key-format>
      <cleartext-key>BASE64VALUE=</cleartext-key>
    </inline-definition>
  </symmetric-key>


  <!-- The following two equivalent examples illustrate the  -->
  <!-- "inline-or-keystore-asymmetric-key-grouping" grouping: -->

  <asymmetric-key>
    <name>example 2a</name>
    <keystore-reference>rsa-asymmetric-key</keystore-reference>
  </asymmetric-key>

  <asymmetric-key>
    <name>example 2b</name>
    <inline-definition>
      <public-key-format>ct:subject-public-key-info-format</public-k\
ey-format>
      <public-key>BASE64VALUE=</public-key>
      <private-key-format>ct:rsa-private-key-format</private-key-for\
mat>
      <cleartext-private-key>BASE64VALUE=</cleartext-private-key>
    </inline-definition>
  </asymmetric-key>


  <!-- the following two equivalent examples illustrate        -->
  <!-- "inline-or-keystore-asymmetric-key-with-certs-grouping": -->

  <asymmetric-key-with-certs>
    <name>example 3a</name>
    <keystore-reference>rsa-asymmetric-key</keystore-reference>
  </asymmetric-key-with-certs>

  <asymmetric-key-with-certs>
    <name>example 3b</name>
    <inline-definition>
      <public-key-format>ct:subject-public-key-info-format</public-k\
ey-format>
      <public-key>BASE64VALUE=</public-key>
      <private-key-format>ct:rsa-private-key-format</private-key-for\
mat>
      <cleartext-private-key>BASE64VALUE=</cleartext-private-key>
      <certificates>
        <certificate>
          <name>a locally-defined cert</name>
          <cert-data>BASE64VALUE=</cert-data>
        </certificate>
      </certificates>
    </inline-definition>
  </asymmetric-key-with-certs>


  <!-- The following two equivalent examples illustrate       -->
  <!-- "inline-or-keystore-end-entity-cert-with-key-grouping": -->

  <end-entity-cert-with-key>
    <name>example 4a</name>
    <keystore-reference>
      <asymmetric-key>rsa-asymmetric-key</asymmetric-key>
      <certificate>ex-rsa-cert</certificate>
    </keystore-reference>
  </end-entity-cert-with-key>

  <end-entity-cert-with-key>
    <name>example 4b</name>
    <inline-definition>
      <public-key-format>ct:subject-public-key-info-format</public-k\
ey-format>
      <public-key>BASE64VALUE=</public-key>
      <private-key-format>ct:rsa-private-key-format</private-key-for\
mat>
      <cleartext-private-key>BASE64VALUE=</cleartext-private-key>
      <cert-data>BASE64VALUE=</cert-data>
    </inline-definition>
  </end-entity-cert-with-key>

</keystore-usage>
2.2.3.3. The "ex-keystore-usage" YANG Module

Following is the "ex-keystore-usage" module's YANG definition:

module ex-keystore-usage {
  yang-version 1.1;
  namespace "http://example.com/ns/example-keystore-usage";
  prefix ex-keystore-usage;

  import ietf-keystore {
    prefix ks;
    reference
      "RFC CCCC: A YANG Data Model for a Keystore";
  }

  organization
    "Example Corporation";

  contact
    "Author: YANG Designer <mailto:[email protected]>";

  description
    "This example module illustrates notable groupings defined
     in the 'ietf-keystore' module.";

  revision 2023-04-17 {
    description
      "Initial version";
    reference
      "RFC CCCC: A YANG Data Model for a Keystore";
  }

  container keystore-usage {
    description
      "An illustration of the various keystore groupings.";
    list symmetric-key {
      key "name";
      leaf name {
        type string;
        description
          "An arbitrary name for this key.";
      }
      uses ks:inline-or-keystore-symmetric-key-grouping;
      description
        "An symmetric key that may be configured locally or be a
         reference to a symmetric key in the keystore.";
    }
    list asymmetric-key {
      key "name";
      leaf name {
        type string;
        description
          "An arbitrary name for this key.";
      }
      uses ks:inline-or-keystore-asymmetric-key-grouping;
      description
        "An asymmetric key, with no certs, that may be configured
         locally or be a reference to an asymmetric key in the
         keystore.  The intent is to reference just the asymmetric
         key, not any certificates that may also be associated
         with the asymmetric key.";
    }
    list asymmetric-key-with-certs {
      key "name";
      leaf name {
        type string;
        description
          "An arbitrary name for this key.";
      }
      uses ks:inline-or-keystore-asymmetric-key-with-certs-grouping;
      description
        "An asymmetric key and its associated certs, that may be
         configured locally or be a reference to an asymmetric key
         (and its associated certs) in the keystore.";
    }
    list end-entity-cert-with-key {
      key "name";
      leaf name {
        type string;
        description
          "An arbitrary name for this key.";
      }
      uses ks:inline-or-keystore-end-entity-cert-with-key-grouping;
      description
        "An end-entity certificate and its associated asymmetric
         key, that may be configured locally or be a reference
         to another certificate (and its associated asymmetric
         key) in the keystore.";
    }
  }
}

2.3. YANG Module

This YANG module has normative references to [RFC8341] and [I-D.ietf-netconf-crypto-types].

<CODE BEGINS> file "[email protected]"

module ietf-keystore {
  yang-version 1.1;
  namespace "urn:ietf:params:xml:ns:yang:ietf-keystore";
  prefix ks;

  import ietf-netconf-acm {
    prefix nacm;
    reference
      "RFC 8341: Network Configuration Access Control Model";
  }

  import ietf-crypto-types {
    prefix ct;
    reference
      "RFC AAAA: YANG Data Types and Groupings for Cryptography";
  }

  organization
    "IETF NETCONF (Network Configuration) Working Group";

  contact
    "WG Web:   https://datatracker.ietf.org/wg/netconf
     WG List:  NETCONF WG list <mailto:[email protected]>
     Author:   Kent Watsen <mailto:[email protected]>";

  description
    "This module defines a 'keystore' to centralize management
     of security credentials.

     Copyright (c) 2023 IETF Trust and the persons identified
     as authors of the code. All rights reserved.

     Redistribution and use in source and binary forms, with
     or without modification, is permitted pursuant to, and
     subject to the license terms contained in, the Revised
     BSD License set forth in Section 4.c of the IETF Trust's
     Legal Provisions Relating to IETF Documents
     (https://trustee.ietf.org/license-info).

     This version of this YANG module is part of RFC CCCC
     (https://www.rfc-editor.org/info/rfcCCCC); see the RFC
     itself for full legal notices.

     The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
     'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
     'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
     are to be interpreted as described in BCP 14 (RFC 2119)
     (RFC 8174) when, and only when, they appear in all
     capitals, as shown here.";

  revision 2023-04-17 {
    description
      "Initial version";
    reference
      "RFC CCCC: A YANG Data Model for a Keystore";
  }

  /****************/
  /*   Features   */
  /****************/

  feature central-keystore-supported {
    description
      "The 'central-keystore-supported' feature indicates that
       the server supports the keystore (i.e., implements the
       'ietf-keystore' module).";
  }

  feature inline-definitions-supported {
    description
      "The 'inline-definitions-supported' feature indicates that
       the server supports locally-defined keys.";
  }

  feature asymmetric-keys {
    description
      "The 'asymmetric-keys' feature indicates that the server
       implements the /keystore/asymmetric-keys subtree.";

  }

  feature symmetric-keys {
    description
      "The 'symmetric-keys' feature indicates that the server
       implements the /keystore/symmetric-keys subtree.";
  }

  /****************/
  /*   Typedefs   */
  /****************/

  typedef symmetric-key-ref {
    type leafref {
      path "/ks:keystore/ks:symmetric-keys/ks:symmetric-key"
         + "/ks:name";
    }
    description
      "This typedef enables modules to easily define a reference
       to a symmetric key stored in the keystore, when this
       module is implemented.";
  }

  typedef asymmetric-key-ref {
    type leafref {
      path "/ks:keystore/ks:asymmetric-keys/ks:asymmetric-key"
         + "/ks:name";
    }
    description
      "This typedef enables modules to easily define a reference
       to an asymmetric key stored in the keystore, when this
       module is implemented.";
  }

  /*****************/
  /*   Groupings   */
  /*****************/

  grouping encrypted-by-choice-grouping {
    description
      "A grouping that defines a 'choice' statement that can be
       augmented into the 'encrypted-by' node, present in the
       'symmetric-key-grouping' and 'asymmetric-key-pair-grouping'
       groupings defined in RFC AAAA, enabling references to keys
       in the keystore, when this module is implemented.";
    choice encrypted-by-choice {
      nacm:default-deny-write;
      mandatory true;
      description
        "A choice amongst other symmetric or asymmetric keys.";
      case symmetric-key-ref {
        if-feature "central-keystore-supported";
        if-feature "symmetric-keys";
        leaf symmetric-key-ref {
          type ks:symmetric-key-ref;
          description
            "Identifies the symmetric key used to encrypt the
             associated key.";
        }
      }
      case asymmetric-key-ref {
        if-feature "central-keystore-supported";
        if-feature "asymmetric-keys";
        leaf asymmetric-key-ref {
          type ks:asymmetric-key-ref;
          description
            "Identifies the asymmetric key whose public key
             encrypted the associated key.";
        }
      }
    }
  }

  grouping asymmetric-key-certificate-ref-grouping {
    description
      "This grouping defines a reference to a specific certificate
       associated with an asymmetric key stored in the keystore,
       when this module is implemented.";
    leaf asymmetric-key {
      nacm:default-deny-write;
      if-feature "central-keystore-supported";
      if-feature "asymmetric-keys";
      type ks:asymmetric-key-ref;
      must '../certificate';
      description
        "A reference to an asymmetric key in the keystore.";
    }
    leaf certificate {
      nacm:default-deny-write;
      type leafref {
        path "/ks:keystore/ks:asymmetric-keys/ks:asymmetric-key"
           + "[ks:name = current()/../asymmetric-key]/"
           + "ks:certificates/ks:certificate/ks:name";
      }
      must '../asymmetric-key';
      description
        "A reference to a specific certificate of the
         asymmetric key in the keystore.";
    }
  }

  // inline-or-keystore-* groupings

  grouping inline-or-keystore-symmetric-key-grouping {
    description
      "A grouping that expands to allow the symmetric key to be
       either stored locally, i.e., within the using data model,
       or a reference to a symmetric key stored in the keystore.

       Servers that do not 'implement' this module, and hence
       'central-keystore-supported' is not defined, SHOULD
       augment in custom 'case' statements enabling references
       to the alternate keystore locations.";
    choice inline-or-keystore {
      nacm:default-deny-write;
      mandatory true;
      description
        "A choice between an inlined definition and a definition
         that exists in the keystore.";
      case inline {
        if-feature "inline-definitions-supported";
        container inline-definition {
          description
            "Container to hold the local key definition.";
          uses ct:symmetric-key-grouping;
        }
      }
      case keystore {
        if-feature "central-keystore-supported";
        if-feature "symmetric-keys";
        leaf keystore-reference {
          type ks:symmetric-key-ref;
          description
            "A reference to an symmetric key that exists in
             the keystore, when this module is implemented.";
        }
      }
    }
  }

  grouping inline-or-keystore-asymmetric-key-grouping {
    description
      "A grouping that expands to allow the asymmetric key to be
       either stored locally, i.e., within the using data model,
       or a reference to an asymmetric key stored in the keystore.

       Servers that do not 'implement' this module, and hence
       'central-keystore-supported' is not defined, SHOULD
       augment in custom 'case' statements enabling references
       to the alternate keystore locations.";
    choice inline-or-keystore {
      nacm:default-deny-write;
      mandatory true;
      description
        "A choice between an inlined definition and a definition
         that exists in the keystore.";
      case inline {
        if-feature "inline-definitions-supported";
        container inline-definition {
          description
            "Container to hold the local key definition.";
          uses ct:asymmetric-key-pair-grouping;
        }
      }
      case keystore {
        if-feature "central-keystore-supported";
        if-feature "asymmetric-keys";
        leaf keystore-reference {
          type ks:asymmetric-key-ref;
          description
            "A reference to an asymmetric key that exists in
             the keystore, when this module is implemented.  The
             intent is to reference just the asymmetric key
             without any regard for any certificates that may
             be associated with it.";
        }
      }
    }
  }

  grouping inline-or-keystore-asymmetric-key-with-certs-grouping {
    description
      "A grouping that expands to allow an asymmetric key and
       its associated certificates to be either stored locally,
       i.e., within the using data model, or a reference to an
       asymmetric key (and its associated certificates) stored
       in the keystore.

       Servers that do not 'implement' this module, and hence
       'central-keystore-supported' is not defined, SHOULD
       augment in custom 'case' statements enabling references
       to the alternate keystore locations.";
    choice inline-or-keystore {
      nacm:default-deny-write;
      mandatory true;
      description
        "A choice between an inlined definition and a definition
         that exists in the keystore.";
      case inline {
        if-feature "inline-definitions-supported";
        container inline-definition {
          description
            "Container to hold the local key definition.";
          uses ct:asymmetric-key-pair-with-certs-grouping;
        }
      }
      case keystore {
        if-feature "central-keystore-supported";
        if-feature "asymmetric-keys";
        leaf keystore-reference {
          type ks:asymmetric-key-ref;
          description
            "A reference to an asymmetric-key (and all of its
             associated certificates) in the keystore, when
             this module is implemented.";
        }
      }
    }
  }

  grouping inline-or-keystore-end-entity-cert-with-key-grouping {
    description
      "A grouping that expands to allow an end-entity certificate
       (and its associated asymmetric key pair) to be either stored
       locally, i.e., within the using data model, or a reference
       to a specific certificate in the keystore.

       Servers that do not 'implement' this module, and hence
       'central-keystore-supported' is not defined, SHOULD
       augment in custom 'case' statements enabling references
       to the alternate keystore locations.";
    choice inline-or-keystore {
      nacm:default-deny-write;
      mandatory true;
      description
        "A choice between an inlined definition and a definition
         that exists in the keystore.";
      case inline {
        if-feature "inline-definitions-supported";
        container inline-definition {
          description
            "Container to hold the local key definition.";
          uses ct:asymmetric-key-pair-with-cert-grouping;
        }
      }
      case keystore {
        if-feature "central-keystore-supported";
        if-feature "asymmetric-keys";
        container keystore-reference {
          uses asymmetric-key-certificate-ref-grouping;
          description
            "A reference to a specific certificate associated with
             an asymmetric key stored in the keystore, when this
             module is implemented.";
        }
      }
    }
  }

  grouping keystore-grouping {
    description
      "Grouping definition enables use in other contexts.  If ever
       done, implementations MUST augment new 'case' statements
       into the various inline-or-keystore 'choice' statements to
       supply leafrefs to the model-specific location(s).";
    container asymmetric-keys {
      nacm:default-deny-write;
      if-feature "asymmetric-keys";
      description
        "A list of asymmetric keys.";
      list asymmetric-key {
        key "name";
        description
          "An asymmetric key.";
        leaf name {
          type string;
          description
            "An arbitrary name for the asymmetric key.";
        }
        uses ct:asymmetric-key-pair-with-certs-grouping;
      }
    }
    container symmetric-keys {
      nacm:default-deny-write;
      if-feature "symmetric-keys";
      description
        "A list of symmetric keys.";
      list symmetric-key {
        key "name";
        description
          "A symmetric key.";
        leaf name {
          type string;
          description
            "An arbitrary name for the symmetric key.";
        }
        uses ct:symmetric-key-grouping;
      }
    }
  }

  /*********************************/
  /*   Protocol accessible nodes   */
  /*********************************/

  container keystore {
    if-feature central-keystore-supported;
    description
      "A central keystore containing a list of symmetric keys and
       a list of asymmetric keys.";
    nacm:default-deny-write;
    uses keystore-grouping {
      augment "symmetric-keys/symmetric-key/key-type/encrypted-key/"
            + "encrypted-key/encrypted-by" {
        description
          "Augments in a choice statement enabling the encrypting
           key to be any other symmetric or asymmetric key in the
           central keystore.";
        uses encrypted-by-choice-grouping;
      }
      augment "asymmetric-keys/asymmetric-key/private-key-type/"
            + "encrypted-private-key/encrypted-private-key/"
            + "encrypted-by" {
        description
          "Augments in a choice statement enabling the encrypting
           key to be any other symmetric or asymmetric key in the
           central keystore.";
        uses encrypted-by-choice-grouping;
      }
    }
  }
}

<CODE ENDS>

3. Support for Built-in Keys

In some implementations, a server may support keys built into the server. Built-in keys MAY be set during the manufacturing process or be dynamically generated the first time the server is booted or a particular service (e.g., SSH) is enabled.

Built-in keys are expected to be set by a vendor-specific process. Any ability for operators to set and/or modify built-in keys is outside the scope of this document.

The primary characteristic of the built-in keys is that they are provided by the server, as opposed to configuration. As such, they are present in <operational>, and <system> [I-D.ietf-netmod-system-config], if implemented.

The example below illustrates what the keystore in <operational> might look like for a server in its factory default state. Note that the built-in keys have the "or:origin" annotation value "or:system".

=============== NOTE: '\' line wrapping per RFC 8792 ================

<keystore xmlns="urn:ietf:params:xml:ns:yang:ietf-keystore"
  xmlns:ct="urn:ietf:params:xml:ns:yang:ietf-crypto-types"
  xmlns:or="urn:ietf:params:xml:ns:yang:ietf-origin"
  or:origin="or:intended">
  <asymmetric-keys>
    <asymmetric-key or:origin="or:system">
      <name>Manufacturer-Generated Hidden Key</name>
      <public-key-format>ct:subject-public-key-info-format</public-k\
ey-format>
      <public-key>BASE64VALUE=</public-key>
      <hidden-private-key/>
      <certificates>
        <certificate>
          <name>Manufacturer-Generated IDevID Cert</name>
          <cert-data>BASE64VALUE=</cert-data>
        </certificate>
      </certificates>
    </asymmetric-key>
  </asymmetric-keys>
</keystore>

The following example illustrates how a single built-in key definition from the previous example has been propagated to <running>:

=============== NOTE: '\' line wrapping per RFC 8792 ================

<keystore xmlns="urn:ietf:params:xml:ns:yang:ietf-keystore"
  xmlns:ct="urn:ietf:params:xml:ns:yang:ietf-crypto-types">
  <asymmetric-keys>
    <asymmetric-key>
      <name>Manufacturer-Generated Hidden Key</name>
      <public-key-format>ct:subject-public-key-info-format</public-k\
ey-format>
      <public-key>BASE64VALUE=</public-key>
      <hidden-private-key/>
      <certificates>
        <certificate>
          <name>Manufacturer-Generated IDevID Cert</name>
          <cert-data>BASE64VALUE=</cert-data>
        </certificate>
        <certificate>
          <name>Deployment-Specific LDevID Cert</name>
          <cert-data>BASE64VALUE=</cert-data>
        </certificate>
      </certificates>
    </asymmetric-key>
  </asymmetric-keys>
</keystore>

After the above configuration is applied, <operational> should appear as follows:

=============== NOTE: '\' line wrapping per RFC 8792 ================

<keystore xmlns="urn:ietf:params:xml:ns:yang:ietf-keystore"
  xmlns:ct="urn:ietf:params:xml:ns:yang:ietf-crypto-types"
  xmlns:or="urn:ietf:params:xml:ns:yang:ietf-origin"
  or:origin="or:intended">
  <asymmetric-keys>
    <asymmetric-key or:origin="or:system">
      <name>Manufacturer-Generated Hidden Key</name>
      <public-key-format>ct:subject-public-key-info-format</public-k\
ey-format>
      <public-key>BASE64VALUE=</public-key>
      <hidden-private-key/>
      <certificates>
        <certificate>
          <name>Manufacturer-Generated IDevID Cert</name>
          <cert-data>BASE64VALUE=</cert-data>
        </certificate>
        <certificate or:origin="or:intended">
          <name>Deployment-Specific LDevID Cert</name>
          <cert-data>BASE64VALUE=</cert-data>
        </certificate>
      </certificates>
    </asymmetric-key>
  </asymmetric-keys>
</keystore>

4. Encrypting Keys in Configuration

This section describes an approach that enables both the symmetric and asymmetric keys on a server to be encrypted, such that traditional backup/restore procedures can be used without concern for raw key data being compromised when in transit.

4.1. Key Encryption Key

The ability to encrypt configured keys is predicated on the existence of a "key encryption key" (KEK). There may be any number of KEKs in a server. A KEK, by its namesake, is a key that is used to encrypt other keys. A KEK MAY be either a symmetric key or an asymmetric key.

If a KEK is a symmetric key, then the server MUST provide an API for administrators to encrypt other keys without needing to know the symmetric key's value. If the KEK is an asymmetric key, then the server MAY provide an API enabling the encryption of other keys or, alternatively, assume the administrators can do so themselves using the asymmetric key's public half.

A server MUST possess (or be able to possess, in case the KEK has been encrypted by yet another KEK) a KEK's cleartext value so that it can decrypt the other keys in the configuration at runtime.

4.2. Configuring Encrypted Keys

Each time a new key is configured, it SHOULD be encrypted by a KEK.

In "ietf-crypto-types" [I-D.ietf-netconf-crypto-types], the format for encrypted values is described by identity statements derived from the "symmetrically-encrypted-value-format" and "symmetrically-encrypted-value-format" identity statements.

Implementations SHOULD provide an API that simultaneously generates and encrypts a key (symmetric or asymmetric) using a KEK. Thusly newly generated key cleartext values may never known to the administrators generating the keys.

In case the server implementation does not provide such an API, then the generating and encrypting steps MAY be performed outside the server, e.g., by an administrator with special access control rights (e.g., an organization's crypto officer).

In either case, the encrypted key can be configured into the keystore using either the "encrypted-key" (for symmetric keys) or the "encrypted-private-key" (for asymmetric keys) nodes. These two nodes contain both the encrypted raw key value as well as a reference to the KEK that encrypted the key.

4.3. Migrating Configuration to Another Server

When a KEK is used to encrypt other keys, migrating the configuration to another server is only possible if the second server has the same KEK. How the second server comes to have the same KEK is discussed in this section.

In some deployments, mechanisms outside the scope of this document may be used to migrate a KEK from one server to another. That said, beware that the ability to do so typically entails having access to the first server but, in some scenarios, the first server may no longer be operational.

In other deployments, an organization's crypto officer, possessing a KEK's cleartext value, configures the same KEK on the second server, presumably as a hidden key or a key protected by access-control (e.g., NACM's "default-deny-all"), so that the cleartext value is not disclosed to regular administrators. However, this approach creates high-coupling to and dependency on the crypto officers that does not scale in production environments.

In order to decouple the crypto officers from the regular administrators, a special KEK, called the "master key" (MK), may be used.

A MK is commonly a globally-unique built-in (see Section 3) asymmetric key. The private raw key value, due to its long lifetime, is hidden (i.e., "hidden-private-key" in Section 2.1.4.5. of [I-D.ietf-netconf-crypto-types]). The raw public key value is often contained in an identity certificate (e.g., IDevID). How to configure a MK during the manufacturing process is outside the scope of this document.

Assuming the server has a MK, the MK can be used to encrypt a "shared KEK", which is then used to encrypt the keys configured by regular administrators.

With this extra level of indirection, it is possible for a crypto officer to encrypt the same KEK for a multiplicity of servers offline using the public key contained in their identity certificates. The crypto officer can then safely handoff the encrypted KEKs to regular administrators responsible for server installations, including migrations.

In order to migrate the configuration from a first server, an administrator would need to make just a single modification to the configuration before loading it onto a second server, which is to replace the encrypted KEK keystore entry from the first server with the encrypted KEK for the second server. Upon doing this, the configuration (containing many encrypted keys) can be loaded into the second server while enabling the second server to decrypt all the encrypted keys in the configuration.

The following diagram illustrates this idea:

 +-------------+                                 +-------------+
 | shared KEK  |                                 | shared KEK  |
 |(unencrypted)|-------------------------------> | (encrypted) |
 +-------------+     encrypts offline using      +-------------+
        ^            each server's MK                |
        |                                            |
        |                                            |
        |  possesses    \o                           |
        +--------------  |\                          |
                        / \         shares with      |
                      crypto    +--------------------+
                      officer   |
                                |
                                |
+----------------------+        |         +----------------------+
|       server-1       |        |         |       server-2       |
|    configuration     |        |         |    configuration     |
|                      |        |         |                      |
|                      |        |         |                      |
|  +----------------+  |        |         |  +----------------+  |
|  |      MK-1      |  |        |         |  |      MK-2      |  |
|  |    (hidden)    |  |        |         |  |    (hidden)    |  |
|  +----------------+  |        |         |  +----------------+  |
|      ^               |        |         |      ^               |
|      |               |        |         |      |               |
|      |               |        |         |      |               |
|      |  encrypted    |        |         |      |  encrypted    |
|      |  by           |        |         |      |  by           |
|      |               |        |         |      |               |
|      |               |        |         |      |               |
|  +----------------+  |        |         |  +----------------+  |
|  |  shared KEK    |  |        |         |  |  shared KEK    |  |
|  |  (encrypted)   |  |        v         |  |  (encrypted)   |  |
|  +----------------+  |                  |  +----------------+  |
|      ^               |     regular      |      ^               |
|      |               |      admin       |      |               |
|      |               |                  |      |               |
|      |  encrypted    |       \o         |      |  encrypted    |
|      |  by           |        |\        |      |  by           |
|      |               |       / \        |      |               |
|      |               |                  |      |               |
|  +----------------+  |----------------->|  +----------------+  |
|  | all other keys |  |     migrate      |  | all other keys |  |
|  |  (encrypted)   |  |  configuration   |  |  (encrypted)   |  |
|  +----------------+  |                  |  +----------------+  |
|                      |                  |                      |
+----------------------+                  +----------------------+

5. Security Considerations

5.1. Security of Data at Rest

The YANG module defined in this document defines a mechanism called a "keystore" that, by its name, suggests that it will protect its contents from unauthorized disclosure and modification.

Security controls for the API (i.e., data in motion) are discussed in Section 5.3, but controls for the data at rest (e.g., on disk) cannot be specified by the YANG module.

In order to satisfy the expectations of a "keystore", it is RECOMMENDED that implementations ensure that the keystore contents are encrypted when persisted to non-volatile memory.

5.2. Unconstrained Private Key Usage

This module enables the configuration of private keys without constraints on their usage, e.g., what operations the key is allowed to be used for (e.g., signature, decryption, both).

This module also does not constrain the usage of the associated public keys, other than in the context of a configured certificate (e.g., an identity certificate), in which case the key usage is constrained by the certificate.

5.3. The "ietf-keystore" YANG Module

The YANG module defined in this document is designed to be accessed via YANG based management protocols, such as NETCONF [RFC6241] and RESTCONF [RFC8040]. Both of these protocols have mandatory-to-implement secure transport layers (e.g., SSH, TLS) with mutual authentication.

The Network Access Control Model (NACM) [RFC8341] provides the means to restrict access for particular users to a pre-configured subset of all available protocol operations and content.

Some of the readable data nodes defined in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get-config, or notification) to these data nodes. These are the subtrees and data nodes and their sensitivity/vulnerability:

  • The "cleartext-key" node:

    • The "cleartext-key" node, imported from the "symmetric-key-grouping" grouping defined in [I-D.ietf-netconf-crypto-types] is additionally sensitive to read operations such that, in normal use cases, it should never be returned to a client. For this reason, the NACM extension "default-deny-all" was applied to it in [I-D.ietf-netconf-crypto-types].
  • The "cleartext-private-key" node:

    • The "cleartext-private-key" node defined in the "asymmetric-key-pair-grouping" grouping defined in [I-D.ietf-netconf-crypto-types] is additionally sensitive to read operations such that, in normal use cases, it should never be returned to a client. For this reason, the NACM extension "default-deny-all" is applied to it in [I-D.ietf-netconf-crypto-types].

All the writable data nodes defined by this module, both in the "grouping" statements as well as the protocol-accessible "keystore" instance, may be considered sensitive or vulnerable in some network environments.. For instance, any modification to a key or reference to a key may dramatically alter the implemented security policy. For this reason, the NACM extension "default-deny-write" has been set for all data nodes defined in this module.

This module does not define any "rpc" or "action" statements, and thus the security considerations for such is not provided here.

Built-in key types SHOULD be either hidden and/or encrypted (not cleartext). If this is not possible, access control mechanisms like NACM SHOULD be used to limit access to the key's secret data to only the most trusted authorized clients (e.g., an organization’s crypto officer).

6. IANA Considerations

6.1. The "IETF XML" Registry

This document registers one URI in the "ns" subregistry of the IETF XML Registry [RFC3688]. Following the format in [RFC3688], the following registration is requested:

   URI: urn:ietf:params:xml:ns:yang:ietf-keystore
   Registrant Contact: The IESG
   XML: N/A, the requested URI is an XML namespace.

6.2. The "YANG Module Names" Registry

This document registers one YANG module in the YANG Module Names registry [RFC6020]. Following the format in [RFC6020], the following registration is requested:

   name:         ietf-keystore
   namespace:    urn:ietf:params:xml:ns:yang:ietf-keystore
   prefix:       ks
   reference:    RFC CCCC

7. References

7.1. Normative References

[I-D.ietf-netconf-crypto-types]
Watsen, K., "YANG Data Types and Groupings for Cryptography", Work in Progress, Internet-Draft, draft-ietf-netconf-crypto-types-26, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-crypto-types-26>.
[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/info/rfc2119>.
[RFC6020]
Bjorklund, M., Ed., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", RFC 6020, DOI 10.17487/RFC6020, , <https://www.rfc-editor.org/info/rfc6020>.
[RFC7950]
Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language", RFC 7950, DOI 10.17487/RFC7950, , <https://www.rfc-editor.org/info/rfc7950>.
[RFC8341]
Bierman, A. and M. Bjorklund, "Network Configuration Access Control Model", STD 91, RFC 8341, DOI 10.17487/RFC8341, , <https://www.rfc-editor.org/info/rfc8341>.

7.2. Informative References

[I-D.ietf-netconf-http-client-server]
Watsen, K., "YANG Groupings for HTTP Clients and HTTP Servers", Work in Progress, Internet-Draft, draft-ietf-netconf-http-client-server-12, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-http-client-server-12>.
[I-D.ietf-netconf-keystore]
Watsen, K., "A YANG Data Model for a Keystore", Work in Progress, Internet-Draft, draft-ietf-netconf-keystore-27, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-keystore-27>.
[I-D.ietf-netconf-netconf-client-server]
Watsen, K., "NETCONF Client and Server Models", Work in Progress, Internet-Draft, draft-ietf-netconf-netconf-client-server-28, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-netconf-client-server-28>.
[I-D.ietf-netconf-restconf-client-server]
Watsen, K., "RESTCONF Client and Server Models", Work in Progress, Internet-Draft, draft-ietf-netconf-restconf-client-server-28, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-restconf-client-server-28>.
[I-D.ietf-netconf-ssh-client-server]
Watsen, K., "YANG Groupings for SSH Clients and SSH Servers", Work in Progress, Internet-Draft, draft-ietf-netconf-ssh-client-server-32, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-ssh-client-server-32>.
[I-D.ietf-netconf-tcp-client-server]
Watsen, K. and M. Scharf, "YANG Groupings for TCP Clients and TCP Servers", Work in Progress, Internet-Draft, draft-ietf-netconf-tcp-client-server-15, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-tcp-client-server-15>.
[I-D.ietf-netconf-tls-client-server]
Watsen, K., "YANG Groupings for TLS Clients and TLS Servers", Work in Progress, Internet-Draft, draft-ietf-netconf-tls-client-server-32, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-tls-client-server-32>.
[I-D.ietf-netconf-trust-anchors]
Watsen, K., "A YANG Data Model for a Truststore", Work in Progress, Internet-Draft, draft-ietf-netconf-trust-anchors-20, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-trust-anchors-20>.
[I-D.ietf-netmod-system-config]
Ma, Q., Wu, Q., and C. Feng, "System-defined Configuration", Work in Progress, Internet-Draft, draft-ietf-netmod-system-config-01, , <https://datatracker.ietf.org/doc/html/draft-ietf-netmod-system-config-01>.
[RFC3688]
Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, DOI 10.17487/RFC3688, , <https://www.rfc-editor.org/info/rfc3688>.
[RFC6241]
Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed., and A. Bierman, Ed., "Network Configuration Protocol (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, , <https://www.rfc-editor.org/info/rfc6241>.
[RFC8040]
Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF Protocol", RFC 8040, DOI 10.17487/RFC8040, , <https://www.rfc-editor.org/info/rfc8040>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/info/rfc8174>.
[RFC8340]
Bjorklund, M. and L. Berger, Ed., "YANG Tree Diagrams", BCP 215, RFC 8340, DOI 10.17487/RFC8340, , <https://www.rfc-editor.org/info/rfc8340>.
[RFC8342]
Bjorklund, M., Schoenwaelder, J., Shafer, P., Watsen, K., and R. Wilton, "Network Management Datastore Architecture (NMDA)", RFC 8342, DOI 10.17487/RFC8342, , <https://www.rfc-editor.org/info/rfc8342>.
[Std-802.1AR-2018]
IEEE SA-Standards Board, "IEEE Standard for Local and metropolitan area networks - Secure Device Identity", , <https://standards.ieee.org/standard/802_1AR-2018.html>.

Appendix A. Change Log

This section is to be removed before publishing as an RFC.

A.1. 00 to 01

  • Replaced the 'certificate-chain' structures with PKCS#7 structures. (Issue #1)
  • Added 'private-key' as a configurable data node, and removed the 'generate-private-key' and 'load-private-key' actions. (Issue #2)
  • Moved 'user-auth-credentials' to the ietf-ssh-client module. (Issues #4 and #5)

A.2. 01 to 02

  • Added back 'generate-private-key' action.
  • Removed 'RESTRICTED' enum from the 'private-key' leaf type.
  • Fixed up a few description statements.

A.3. 02 to 03

  • Changed draft's title.
  • Added missing references.
  • Collapsed sections and levels.
  • Added RFC 8174 to Requirements Language Section.
  • Renamed 'trusted-certificates' to 'pinned-certificates'.
  • Changed 'public-key' from config false to config true.
  • Switched 'host-key' from OneAsymmetricKey to definition from RFC 4253.

A.4. 03 to 04

  • Added typedefs around leafrefs to common keystore paths
  • Now tree diagrams reference ietf-netmod-yang-tree-diagrams
  • Removed Design Considerations section
  • Moved key and certificate definitions from data tree to groupings

A.5. 04 to 05

  • Removed trust anchors (now in their own draft)
  • Added back global keystore structure
  • Added groupings enabling keys to either be locally defined or a reference to the keystore.

A.6. 05 to 06

  • Added feature "local-keys-supported"
  • Added nacm:default-deny-all and nacm:default-deny-write
  • Renamed generate-asymmetric-key to generate-hidden-key
  • Added an install-hidden-key action
  • Moved actions inside fo the "asymmetric-key" container
  • Moved some groupings to draft-ietf-netconf-crypto-types

A.7. 06 to 07

  • Removed a "require-instance false"
  • Clarified some description statements
  • Improved the keystore-usage examples

A.8. 07 to 08

  • Added "inline-definition" containers to avoid posibility of the action/notification statements being under a "case" statement.
  • Updated copyright date, boilerplate template, affiliation, folding algorithm, and reformatted the YANG module.

A.9. 08 to 09

  • Added a 'description' statement to the 'must' in the /keystore/asymmetric-key node explaining that the descendant values may exist in <operational> only, and that implementation MUST assert that the values are either configured or that they exist in <operational>.
  • Copied above 'must' statement (and description) into the inline-or-keystore-asymmetric-key-grouping, inline-or-keystore-asymmetric-key-with-certs-grouping, and inline-or-keystore-end-entity-cert-with-key-grouping statements.

A.10. 09 to 10

  • Updated draft title to match new truststore draft title
  • Moved everything under a top-level 'grouping' to enable use in other contexts.
  • Renamed feature from 'local-keys-supported' to 'inline-definitions-supported' (same name used in truststore)
  • Removed the either-all-or-none 'must' expressions for the key's 3-tuple values (since the values are now 'mandatory true' in crypto-types)
  • Example updated to reflect 'mandatory true' change in crypto-types draft

A.11. 10 to 11

  • Replaced typedef asymmetric-key-certificate-ref with grouping asymmetric-key-certificate-ref-grouping.
  • Added feature feature 'key-generation'.
  • Cloned groupings symmetric-key-grouping, asymmetric-key-pair-grouping, asymmetric-key-pair-with-cert-grouping, and asymmetric-key-pair-with-certs-grouping from crypto-keys, augmenting into each new case statements for values that have been encrypted by other keys in the keystore. Refactored keystore model to use these groupings.
  • Added new 'symmetric-keys' lists, as a sibling to the existing 'asymmetric-keys' list.
  • Added RPCs (not actions) 'generate-symmetric-key' and 'generate-asymmetric-key' to *return* a (potentially encrypted) key.

A.12. 11 to 12

  • Updated to reflect crypto-type's draft using enumerations over identities.
  • Added examples for the 'generate-symmetric-key' and 'generate-asymmetric-key' RPCs.
  • Updated the Introduction section.

A.13. 12 to 13

  • Updated examples to incorporate new "key-format" identities.
  • Made the two "generate-*-key" RPCs be "action" statements instead.

A.14. 13 to 14

  • Updated YANG module and examples to incorporate the new iana-*-algorithm modules in the crypto-types draft..

A.15. 14 to 15

  • Added new "Support for Built-in Keys" section.
  • Added 'must' expressions asserting that the 'key-format' leaf whenever an encrypted key is specified.
  • Added inline-or-keystore-symmetric-key-grouping for PSK support.

A.16. 15 to 16

  • Moved the generate key actions to ietf-crypt-types as RPCs, which are augmented by ietf-keystore to support encrypted keys. Examples updated accordingly.
  • Added a SSH certificate-based key (RFC 6187) and a raw private key to the example instance document (partly so they could be referenced by examples in the SSH and TLS client/server drafts.

A.17. 16 to 17

  • Removed augments to the "generate-symmetric-key" and "generate-asymmetric-key" groupings.
  • Removed "generate-symmetric-key" and "generate-asymmetric-key" examples.
  • Removed the "algorithm" nodes from remaining examples.
  • Updated the "Support for Built-in Keys" section.
  • Added new section "Encrypting Keys in Configuration".
  • Added a "Note to Reviewers" note to first page.

A.18. 17 to 18

  • Removed dangling/unnecessary ref to RFC 8342.
  • r/MUST/SHOULD/ wrt strength of keys being configured over transports.
  • Added an example for the "certificate-expiration" notification.
  • Clarified that OS MAY have a multiplicity of underlying keystores and/or TPMs.
  • Clarified expected behavior for "built-in" keys in <operational>
  • Clarified the "Migrating Configuration to Another Server" section.
  • Expanded "Data Model Overview section(s) [remove "wall" of tree diagrams].
  • Updated the Security Considerations section.

A.19. 18 to 19

  • Updated examples to reflect new "cleartext-" prefix in the crypto-types draft.

A.20. 19 to 20

  • Addressed SecDir comments from Magnus Nystroem and Sandra Murphy.

A.21. 20 to 21

  • Added a "Unconstrained Private Key Usage" Security Consideration to address concern raised by SecDir.
  • (Editorial) Removed the output of "grouping" statements in the tree diagrams for the "ietf-keystore" and "ex-keystore-usage" modules.
  • Addressed comments raised by YANG Doctor.

A.22. 21 to 22

  • Added prefixes to 'path' statements per trust-anchors/issues/1
  • Renamed feature "keystore-supported" to "central-keystore-supported".
  • Associated with above, generally moved text to refer to a "central" keystore.
  • Aligned modules with `pyang -f` formatting.
  • Fixed nits found by YANG Doctor reviews.

A.23. 22 to 23

  • Updated 802.1AR ref to latest version
  • Replaced "base64encodedvalue==" with "BASE64VALUE=" in examples.
  • Minor editorial nits

A.24. 23 to 24

  • Added features "asymmetric-keys" and "symmetric-keys"
  • fixup the 'WG Web' and 'WG List' lines in YANG module(s)
  • fixup copyright (i.e., s/Simplified/Revised/) in YANG module(s)
  • Added Informative reference to ma-netmod-with-system

A.25. 24 to 25

  • Added a "term" for "key" (IEEE liaison).
  • Clarified draft text to ensure proper use of the "key" term. (IEEE liaison)
  • Added statement that built-in keys SHOULD NOT be cleartext. (IEEE liaison)
  • Added "if-feature central-keystore-supported" to top-level "keystore" container.

A.26. 25 to 26

  • Updated per Shepherd reviews impacting the suite of drafts.

A.27. 26 to 27

  • Updated per Shepherd reviews impacting the suite of drafts.

A.28. 27 to 28

  • Updated per Tom Petch review.
  • s/local/inline/ in feature names, grouping names, and node names.
  • Removed special handling text for built-in keys
  • Updated section on built-in keys to read almost the same as the section in the trust-anchors draft.

Acknowledgements

The authors would like to thank for following for lively discussions on list and in the halls (ordered by first name): Alan Luchuk, Andy Bierman, Benoit Claise, Bert Wijnen, Balázs Kovács, David Lamparter, Eric Voit, Ladislav Lhotka, Liang Xia, Juergen Schoenwaelder, Mahesh Jethanandani, Magnus Nyström, Martin Björklund, Mehmet Ersue, Phil Shafer, Qin Wu, Radek Krejci, Ramkumar Dhanapal, Reshad Rahman, Sandra Murphy, Sean Turner, and Tom Petch.

Author's Address

Kent Watsen
Watsen Networks